Network Analyzer
- News
As the saying goes, if a worker wants to do his job well, he must first sharpen his tools.
For the measurement of products such as radio frequency components (ex: antennas) or signal wires (ex: coaxial jumpers), testing and confirmation cannot be done with ordinary electricity meters.
It must be measured through the equipment [Network Analyzer] to ensure that the wire processing can transmit the signal from one place to another with minimal distortion.
- What is a network analyzer?
The network analyzer is an instrument that measures the network characteristics of the device by measuring the amplitude and phase response of each port on the network to the frequency/power sweep test signal. It combines various technologies such as spectrum analysis, signal generation, and signal separation. It is known as the “King of Instruments”. It is an essential test and measurement instrument in the radio frequency and microwave field, and is the basic form of special instruments in many industries.
- What are the functions of a network analyzer?
The network analyzer products can measure multi-port vector S parameters and implement various levels of system error calibration. They are highly integrated RF microwave instruments and are used in basic industries and fields such as chip testing, microwave devices, materials science, and electronic communications, such as filters, antennas, and power amplifiers.
- Verification method
There are two common verification methods:
-
- Transmission, Reflection, Line (TRL)
- Short circuit, open circuit, load, penetration (SOLT)
They are different combinations of impedance and transmission measurements that analyze cables and test fixtures for verification.
These calibration techniques link a standard set of known characteristics to the measurement setup of the device under test. Cables and connectors are calibrated by comparing measured values with standard values.
JetHarness Inspection and Testing
All network jumpers/coaxial jumpers are tested according to customer requirements or IPC standards, using network analyzers/cable testers… equipment to confirm that the electrical characteristics test is normal before PASS release.
A test report is included with the shipment, demonstrating JetHarness’s strict quality control and providing unparalleled guarantee, giving you greater peace of mind when using Harness.
New Visitor
Manufacturing Production
Safety Instructions
About Us
Terms of Service
© 2022 Jet Harness
Design by NSS Group
